Kingspan Kooltherm K112 Timber & Steel Frame Board 1200mm x 2400mm – All Sizes
Kingspan Kooltherm K112 Timber and steel is used between studs or as an insulation sheathing in both timber frame and steel frame walls.
When installed in construction Kooltherm K112 offers premium performance with a thermal conductivity as low as 0.019 W/mK.
*Sold as Packs only. We do not split packs.
Kingspan Kooltherm K112 Timber & Steel Frame Board
Kingspan Kooltherm K112 is made up of a rigid phenolic core and is faced on both sides with low emissivity foil to give that low thermal conductivity.
This makes this framing board insulation product perfect for new builds and refurbishment projects since it’s easy to install and handle.
In a refurbishment project this wall insulation can bring u-values even lower in areas where you previously might not have thought about insulating.
Resistant to the passage of water vapour, installing Kooltherm K112 as insulation sheathing can be a good idea to ensure other insulation types are kept safe and performing.
This is also down to the fact that Kooltherm K112 isn’t affected by air infiltration.
|Thickness||Boards Per Pack||Pack Coverage|
Kingspan Kooltherm K112 Framing Board is a premium performance insulation, with a fibre-free rigid thermoset phenolic insulation core faced on both sides with a low emissivity composite foil facing which is used in timber or steel frame walls.
- Thermal Conductivity (W/mK): 0.019 W/m.K
- Size: 2400mm x 1200mm
- Compressive strength at 10% compression: exceeds 100 kPa
Kingspan Kooltherm K112 Framing Board is manufactured to the highest standards under a management system certified to ISO 9001: 2015 (Quality management systems. Requirements), ISO 14001: 2015 (Environmental Management Systems. Requirements), BS OHSAS 18001: 2007 (Occupational Health and Safety Management Systems. Requirements) and ISO 50001: 2011 (Energy Management Systems. Requirements with Guidance for Use).
Kingspan Kooltherm K112 Timber Board is faced on both sides with a low emissivity composite foil, autohesively bonded to the insulation core during manufacture.
This reflective, low emissivity surface improves the thermal resistance of any unventilated cavity adjacent to the board.
The core of Kingspan Kooltherm K112 Framing Board is a premium performance fibre–free rigid thermoset phenolic insulant manufactured with a blowing agent that has zero Ozone Depletion Potential (ODP) and low Global Warming Potential (GWP).