K Rend HP14 base coat is a high polymer base designed to provide enhanced performance on difficult substrates. This cost effective solution is also used for its flexibility and high tensile strength on thin coat systems.
It has increased water resistance and adhesion. It may be applied by hand or by spray and the use of scrim cloth may be required.
- Coverage: 1.8kg / mm thick / sq m
- Require: 8-11kg / sq m for 4-6mm thickness.
Application Instructions:
- Primary Coat, where required should be applied to substrates as preparation for subsequent coats. Thickness should be as per product specification. It is important to take special care to straighten with a Darby / straight edge to ensure that the next coat is applied to uniform level
- Form a light key only
- Allow 24 hours curing time before further application, unless advised otherwise. For info on unusual substrates, seek technical advice.
