K1 Spray can be used with most render spray machines. It is ideal for larger projects where the speed of machine application can offer time saving benefits. Suitable for hand application also.
Application Instructions:
ONE COAT / FINISH COAT
- One coat is applied directly onto block work and must be finished to a minimum of 16mm thick to avoid 'ghosting'
- The material should be applied 18mm thick in 2 passes; the first pass 6-8mm and the second pass 12-14mm. (See also under Spray Application). After setting, 2mm is scraped off for a 16mm finish
- If the material is being used in a two coat application the finish coat is applied over a K Rend Base Coat to line level, using a Darby or straight edge, to a minimum thickness of 10-12mm. When straightening, hollows should be filled out immediately before a skin is formed
- Care should be taken to avoid small hollows, which can make it difficult to achieve a good finish. Small areas such as quoins, reveals and bands can be left with a plastic float
- Do not polish.
